Bitumen Testing Instruments, Automatic Bitumen Penetrometer, Ductility Testing Machines,
Marshall Stability Apparatus, Core Cutting Machines, Manufacturer, Pune, India

 
 
 
 
 

• Bitumen Testing Instruments

 
Bitumen is the prime ingredient in constructing and hence, it is absolutely essential to enhance its strength. It is the different types of Bitumen Testing Equipment that carry out the job effectively. We offer our clients technically superior bitumen testing equipment such as Bitumen Penetration Test Apparatus, Ring & Ball (Softening Point) Test Apparatus, Ductility Testing Machine, Standard Tar Viscometer, Bitumen Laboratory Mixer etc. Every equipment is designed & developed with highest level of precision to meet up the requirements of different industries and their respective testing procedures. We maintain a competitive edge over other market players due to our ability to offer the customized bitumen testing equipment.
Automatic Bitumen Penetrometer
Automatic Bitumen Penetrometer

We bring forward unmatched quality Automatic Bitumen Spectrometer that measures the consistency of grease and petroleum. The Automatic Bitumen Penetration Testing Equipment, which we fabricate, has a base with leveling screws for mounting a vertical pillar. The Automatic Time Controller fitted in our Equipment makes it a favored choice among numerous industries. We are well cemented amidst the major Automatic Bitumen Penetration Testing Equipment Suppliers, based in India.

 

Features :
• Built in electromagnet
• Suitable for operation on 220v, 50Hz, single phase supply
• Precision performance
• Long lasting
Ductility Testing Machines
   
Ductility Testing Machines

We bring forth a wide gamut of Ductility Testing Machine that is widely used for determining the ductility of asphalt bitumen, native asphalt, cut black bitumen and blown type bitumen. The Ductility Testing Apparatus, which we manufacture, consists of three moued assemblies on a base plate. Our Ductility Apparatus has been vastly appreciated for providing accurate outputs. We are well placed amidst the foremost Ductility Testing Equipment Manufacturers.

Features :
• Operated through electric current
• Consistent speed
• Continuous operations due to electric motor driven reduction gears in the machine
• Highly reliable
• Suitable for operation on 220V, 50 Hz, single phase supply
Marshall Stability Apparatus
Marshall Stability Apparatus
We provide Marshall Stability Apparatus, which stands apart among its competitors owing to its remarkable quality. Our Marshall Stability Test Apparatus endows with accurate results, which has made it a preferred pick among the customers. The Stability Apparatus, which we manufacture, is specially designed as per the ASTM-D-1559 Standards that includes all instruments necessary for providing precise results. We are recognized as one of the prominent Marshall Stability Equipment Suppliers.
Features :
• Ideal for determining resistance to plastic flow of cylindrical specimens of bituminous mixture
• Effortless maintenance
• Easy operations
• Extremely efficient
   
• Ring & Ball (Softening Point) Test Apparatus
Ring & Ball (Softening Point) Test Apparatus

This apparatus is meant for determination of softening point of bituminous materials according to IP 58 and IS 1205. Softening point is that temp, at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition.
GENERAL DESCRIPTION & SPECIFICATIONS :

The apparatus consist of Glass beaker of heat resistant glass of internal dia 8.5 cm X12 cm depth (approx.). Two steel balls each of 9.5 mm dia. (Weighing 3.50 ±0.05 gm). Two tapered brass mould, Two ball guides, ring stand. Supplied with a heating unit designed to give temp, rise at 5 C per minute required under standard. The temperature is controlled with an energy regulator. In addition, there is an electrically operated stirrer mounted on a stand with chuck and glass rod or aluminum rod and for stirring the water in the water bath. Operation on 230 Volts, single phase, 50 Cycles, AC.

OPTIONAL ACCESSORIES :
The following accessories are not part of the standard supply and supplied at an extra cost.< /span>

1) Thermometer IP 60C. 2) Thermometer IP 61C. 3)Programmable Digital Temp, indicator cum controller. 4) Brass plate for specimen preparation. 5) Glycerin. 6) Cooling Cabinet

 
Core Cutting Machines
Used to Drill cores of Concrete, Rocks, Stones, Bitumen Pavement. Tiles orthe similar material.
GENERAL DESCRIPTION & SPECIFICATIONS :
Core Cutting Machines

The Machine is provided with hand operated rapid screw feed through a lever drive with built in ball bearing.The drill spindle is floating on tapered roller bearings. Water swivel is totally enclosed and mounted on the drill spindle. The drill drive shaft is mounted on two ball bearings in the drill head. The drill is provided with water tank to deliver the water to the cutting operation. The drill is mounted on a sub base which is further mounted on trolley. The trolley is mounted on Scooter tyre wheels and leveling screws to facilitate easy shifting and setting. The drill has an end towing attachment. For longer travels and towing, extra attachment of Rubber tyre (Scooter Wheel) is highly recommended.

 
• Specific Gravity Bottle Products
Specific Gravity Bottle Products

Specific Gravity Bottle with stopper of 50 ml capacity, which is available in two patterns:

1) The ordinary capillary type specific gravity bottle with a neck of 6 mm diameter.
2)The wide mouthed capillary type specific gravity bottle with a neck of 25 mm diameter.

The ordinary specific gravity bottle is used for materials which remain-absoiutefy fluid at If- C while the wide mouth capillary type is used for materials which remain semisolid of high viscous
at27°C.

Tar Viscometer Products
Tar Viscometer Products

Viscosity is the property of the fluid by which it resist flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil.
Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice under standard condition of test.

GENERAL DESCRIPTION & SPECIFICATIONS:
The apparatus consist of bath with cup of 10 mm orifice and sleeve stirrer with ball lifting clip and ball The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws. Suitable to operate on 230 V.50 Hz. AC single phase.

OPTIONAL ACCESSORIES:
The following accessories and consumables are not part of the standard
supply and are mandatory for the testing work.

1) Thermometer IP 8C/9C/10C. 2) Measuring Cylinder 100 ml. 3) Mechanical / Digital Stop Watch. 4) Silver plated orifice cup 4mm. 5) Solvent (Benzene/Toluene) for cleaning.

NOTE:
The Tar Viscometer is also available for multiple test fitted with Digital Temperature indicator cum controller and FHP electric stirrer. Supplied with Tar Cups of 10 mm and 4 mm orifice with valves.

   
Bitumen Extraction Test Apparatus
For determining bitumen percentage in Bituminous paving mixtures. It has a removable, precision machined, aluminium rotor bowl, mounted on a vertical shaft. A filter paper disc is pressed in-between the rotor bowl and cover plate by tightening a knurled nut.
 
• Marshall Stability Test Apparatus
The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and aggregate upto 25.4 mm maximum sizes.
Flash & Fire Point Test Apparatus
Specification :

Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having electric heater with temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply.

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.

 
Standard Tar Viscometer
Standard Tar Viscometer used for determining the viscosity of cut back bitumen and road-oil. The viscometer consists of a chrome plated copper bath, with a drain valve and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with leveling feet.
Bitumen Laboratory Mixer
Laboratory Mixer for mixing of Bitumen for making different types of test specimens for mix design in the laboratory. The apparatus comprises of A motor driven mixer which simultaneously imparts two motions to the mixing paddle i.e. revolving and planetary.
 
• Bitumen Penetration Test Apparatus
Penetration Apparatus are used for testing bitumen, tar, cement and soils. A Chosen force is applied over a given area for a known period of time and the depth of penetration or the depression made in the sample is measured in tenths of a millimeter which is expressed as a penetration number.
 
TOP
 
 
We are Manufacturer & service provider and our setup is situated at Hadapsar, Pune ( Maharashtra, India )